Thermoworks 810-960 ECOTEMP ALARM THERMOMETER Manuel d'utilisateur télécharger pdf

Instrument Operation

The instrument is switched on by pressing the ON/OFF button located on the front of the

instrument. Within one second the thermometer is ready to work. Apply the tip of the probe to

the substance or medium to be measured. The instrument reading may take a few seconds to

stabilize, depending on the nature of the measurement.

MAX/MIN Memory Function

Press the MAX/MIN button to display the maximum reading and a MAX symbol will ash in the

display. Press the MAX/MIN button again to display the minimum reading and a MIN symbol will

ash in the display. Press MAX/MIN button again to return to the normal reading. To clear the

MAX/MIN temperature memory, press the MAX/MIN and ON/OFF buttons simultaneously.

Alarm Function

To operate the audible alarm function, simply press the set button to adjust the high or low

alarm reading, the alarm settings will then ash in the display. The user can adjust the alarm

temperatures via the up or down key, pressing the set key to retain the information. The audible

alarm will sound when the temperature setting has been exceeded and will cease once the

temperatures have returned to within the boundaries set.

Battery Replacement

Replace the batteries immediately if “Bat” illuminates or if the reading becomes erratic or the

display clarity fades, using two AAA, MN2400 or 1.5 volt equivalent. The batteries are located

under the battery cover at the rear of the instrument.

EMC/RFI

Readings may be affected if the unit is operated within a radio frequency electromagnetic eld

strength of approximately 3 volts per metre, but the performance of the instrument will not be

permanently affected.

EcoTemp Specications

Range -58 to +392°F (-50 to +200°C)

Resolution 0.1°C or 0.1°F

Accuracy ±1.8°F (-58 to +302°F) ±1°C (-50 to +150°C)

Battery AAA (2 x MN2400)

Battery Life 1,000 hours

Sensor Type Thermistor

Display Custom 22mm LCD

Dimensions 20 x 58 x 165mm

Weight 115 grams including probe

Product Warranty & Guarantee

This instrument carries a one-year warranty and guarantee against defects in either components

or workmanship. During this period, products that prove to be defective will, at the discretion of

ThermoWorks, be either repaired or replaced without charge.

The product warranty and guarantee does not cover damage caused by fair wear and tear,

abnormal storage conditions, incorrect use, accidental misuse, abuse, neglect, misapplication

or modication, or use with non-ThermoWorks hardware/software. No warranty of tness

for a particular purpose is offered and the user assumes the entire risk of using the product.

Any liability by ThermoWorks is limited only to the replacement of defective materials or

workmanship, and ThermoWorks accepts no responsibility for consequential loss. In line with

our policy of continuous development, we reserve the right to amend our product specication

without prior notice.

EcoTemp Thermometer 810-960

Utah, USA

Ph: 801-756-7705 Fax: 801-756-8948

www.thermoworks.com

ecotemp pkg 3/23/04, 4:04 PM2

EcoTemp Thermometer 810-960 1

Résumé du contenu

Page 1 - EcoTemp Thermometer 810-960

Instrument OperationThe instrument is switched on by pressing the ON/OFF button located on the front of the instrument. Within one seco

Commentaires sur ces manuels

Pas de commentaire

Thermoworks 810-960 ECOTEMP ALARM THERMOMETER Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Instruments de mesure Thermoworks 810-960 ECOTEMP ALARM THERMOMETER. ThermoWorks 810-960 ECOTEMP ALARM THERMOMETER User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Thermoworks 810-960 ECOTEMP ALARM THERMOMETER