Thermoworks TR-72-UI 2 CHANNEL LOGGERS WITH USB Manuel d'utilisateur télécharger pdf (Page 17)

Checking After Connecting

1.Open the [Control Panel] and double click on [System]; the system

properties will be displayed.

2.Click the [Device Manager] Tab, and the [Device Manager] Window will

appear.

「Device Manager」Tab

「USB Recorder1」

3.Check to see if [USB Recorder 1] is listed under [USB Recorder COM].

Connecting the Sensor

Connecting the Sensor.

[TR-71U]

- If a temperature sensor is connected to only the ch. 2 jack, the internal

sensor will be used to measure for ch. 1.

- To avoid poor connections, be sure to push the sensor connector securely

into the jack.

Note:If a sensor extension cable is being used with the data logger

connected by USB to your computer, electromagnetic waves may cause

large errors in measurements.

[TR-72U]

Caution:When using the temperature/humidity sensor in environments

where the temperature is 0 to 15 and humidity under 30 RH, there may

occur changes in measurement readings. This is not a malfunction.

To avoid poor connections, be sure to push the sensor connector securely

into the jack.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23

Pas de commentaire

Thermoworks TR-72-UI 2 CHANNEL LOGGERS WITH USB Manuel d'utilisateur Page 17