Thermoworks CF-IR CLOSE FOCUS INFRARED THERMOMETER Manuel d'utilisateur télécharger pdf

CF-IR Close Focus Infrared Thermometer

Thank you for purchasing our non-contact infrared thermometer.

OVERVIEW

1. LCD

2. MODE button

3. SCAN button

4. Battery cover

5. Infrared sensor

6. Lasers

7. Protective cover

SPECIFICATIONS

Thermometer Measurement Range -67 to 428°F / -55 to 220°C

Ambient Operating Temperature 32 to 122°F / 0 to 50°C

Display Resolution Thermometer: 0.2°C / 0.5°F; Stop Watch: 1 sec.

Accuracy (Tamb=23 ±3°C)* -55 to 0°C; ±(2+0.05/deg)°C; above 0°C; ±2°C (4°F)

or ±2% of the reading, whichever is greater.

Measurement Distance 0.7 inch / 18mm, with a 0.1 inch / 2.5mm spot size

Emissivity 0.95 default; adjustable to 1 in 0.05 increments

Features Auto real time clock and room temperature while

power is off; °C/°F switchable;

MIN/MAX/LOCK, stop watch

Battery Type AAA x 2

Battery Life 15 hrs continuous (auto power off after 15 sec)

Dimensions 6.7 (W) x 1.5 (H) x 1.0 (D) inches /

170 (W) x 38 (H) x 25 (D) mm

Weight 4.4 oz/ 125 grams including two AAA cells

Certiﬁcate Includes Certificate of Conformance

*IR accuracy can be affected by the

emissivity setting, target spot size,

rapid changes in ambient temperature,

and environmental conditions.

SETTING THE CLOCK

1. Press the SCAN button to turn the thermometer on. Press the MODE button seven times until the SET icon ﬂashes.

2. Press the SCAN button to choose between the 12 or 24 hour time format.

3. Press the MODE button to select the hours. The hour digits will blink. Press the SCAN button to set the hours.

4. Press the MODE button to select the minutes. The minutes digits will blink. Press the SCAN button to set the minutes.

5. Press the MODE button when done.

Close Focus IR

MODE

801-75 6-7705

www.ther moworks .com

Meas. area

0.1" (2.5mm)

0.47" (12mm)

0.67"

(17mm)

0.63"

(16mm)

Close Focus IR

MODE

801-75 6-7705

www.ther moworks .com

Meas. area

0.1" (2.5mm)

0.47" (12mm)

0.67"

(17mm)

0.63"

(16mm)

OPERATING INSTRUCTIONS

1. Information is displayed on the LCD through the following symbols:

A. 12/24 hr indicator

B. Clock

C. SET icon

D. COUNT icon

E. LOCK indicator

F. Selected temperature scale

(˚C or ˚F)

G. Ambient temperature icon

H. Temperature reading

I. MIN/MAX indicators

J. HOLD Indicator

K. SCAN indicator

L. Low battery indicator

2. Remove the protective cover from the sensor end of the thermometer.

3. Press the SCAN button to turn the thermometer on.

4. Hold the thermometer like a pen. Position the infrared sensor 0.7 inches / 18mm from the object to be measured.

5. Press and hold the SCAN button with the index ﬁnger. The two lasers will converge into one when the exact distance is

obtained. Be sure the target is located at this focal point. The area measured is 0.1 inches / 2.5mm in diameter.

6. Pressing the SCAN button momentarily will result in a momentary reading. Holding the SCAN button will result in a

continuous reading.

7. The thermometer will automatically power off if left idle for more than 15 seconds. If you have set the CLOCK mode,

the clock and ambient room temperature will continue to display even after 15 seconds.

USING THE STOP WATCH

1. Press the SCAN button to turn the thermometer on.

Press the MODE button six times until the COUNT icon ﬂashes.

2. Press the SCAN button to start or stop the stop watch.

Press the MODE button to reset the stop watch to zero.

OTHER FUNCTIONS

Power on and press the MODE button once for the Minimum (MIN) or twice for

Maximum (MAX) modes. When the MIN or MAX icon ﬂashes, press the SCAN button

to conﬁrm. Hold down the SCAN button, the minimum or maximum reading of

measurement will be continuously updated.

Power on and press the MODE button three times. When the LOCK icon ﬂashes,

press the SCAN button to conﬁrm. This mode is particularly useful for continuous

monitoring of temperatures for up to 60 minutes or until the SCAN button is pressed.

Power on and press the MODE button four times. When the °C icon ﬂashes, press

the SCAN button to change the scale to °F.

Power on and press the MODE button ﬁve times. When the default emissivity “95E”

appears, press the SCAN button to modify the emissivity setting. Press MODE button

when complete.

Close Focus IR

MODE

801-7 56-770 5

www.the r mowor ks.co m

Meas. area

0.1" (2.5mm)

0.47" (12mm)

0.67"

(17mm)

0.63"

(16mm)

Close Focus IR

MODE

801-7 56-770 5

www.the r mowor ks.co m

Meas. area

0.1" (2.5mm)

0.47" (12mm)

0.67"

(17mm)

0.63"

(16mm)

<30 min

Min:Sec = 01:28 & 0.75 sec

>30 min

Hour:Min:Sec = 01:28:47 sec

(resolution = 0.01 sec, range to 24 hour

MIN/MAX

LOCK

°C /°F

Emissivity

1 2

Résumé du contenu

Page 1 - Hour:Min:Sec = 01:28:47 sec

CF-IR Close Focus Infrared Thermometer Thank you for purchasing our non-contact infrared thermometer. OVERVIEW1. LCD2. MODE button3. SCAN button 4. Ba

Page 2 - CERTIFICATE OF CONFORMANCE

CAUTION1. Do not look directly into the laser beam. Permanent eye damage may result.2. Never point the device towards anyone’s eyes.3. Keep out of re

Commentaires sur ces manuels

Pas de commentaire

Thermoworks CF-IR CLOSE FOCUS INFRARED THERMOMETER Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Instruments de mesure Thermoworks CF-IR CLOSE FOCUS INFRARED THERMOMETER. ThermoWorks CF-IR CLOSE FOCUS INFRARED THERMOMETER User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Thermoworks CF-IR CLOSE FOCUS INFRARED THERMOMETER