Thermoworks P795 PRINTING DATALOGGER THERMOMETER Manuel d'utilisateur

Precision Measuring Instrument P795English languageOperating manualP795_englisch_V010608.docDOSTMANN electronic

Summary1. Handling1.1. General advices1.2. Setting to work1.3. Switch on/off1.4. Menu 1.4.1. Measuring unit switching (UNIT)1.4.2. Difference temperat

1. Handling1.1 General advice- For cleaning the instrument please do not use abrasive cleaner but a dry or wet piece of cloth.- Please store the measu

1.4.1 Measuring unit switching °C, °F and Resistance (Ohm’s)Unit = Measuring unit Measuring unit temperature (°C=Celsius, F°=Fahrenheit, o=Ohm)To chan

5.4.4 Calibration function / [CAL]Despite high quality manufacturing techniques, each probe is slightly different from specified standards. To elimina

3.) Calibration by physical standard references / oP2Use the up and down keys [] to select oP2. Push [ENTER/MENUE] to confirm.On the bottom of the d

The CAL-segment and the small 4 indicates to the user that oP4 is activated.Note: If a Smart probe will be disconnected during the instrument is worki

E.g. of the instrument’s LCD by activated logging mode:On the bottom you can see the percentage of the occupied memory(0..99%). If a calibration optio

The Instrument has a special Tare/Zero-button. Pressing the [F1] key once, the instrument will subtract the last measured value from the actual measur